功率超声珩磨单颗磨粒耦合颤振模型
- 文件大小:248.69KB
- 浏览次数:
- 发布时间:2014-03-07
文件介绍:
本资料包含pdf文件1个,下载需要1积分
Flutter,a dynamic and severe self-excited vibration easily to produce in power ultrasonic honing,is one of the important factors that affect the processing quality of the workpiece and the efficiency of the machine tool.In the basis of study in mechanism of power ultrasonic honing,choosing single abrasive and workpiece as research objects,respectively established the physical and mathematical of power ultrasonic honing nonlinear system with two degrees of freedom of coupling flutter,and determined the differential expression of the model,and provided a theoretical basis for to further seeking the strategy for repressing and eliminating the flutter.颤振是功率超声珩磨中极易产生的一种动态强烈自激振动现象,是影响工件加工质量和机床加工效率的重要因素之一。在对功率超声珩磨机理研究的基础上,以单颗磨粒工件系统为研究对象,分别建立了功率超声珩磨系统的两自由度非线性耦合颤振物理模型及数学模型,并确定了其微分方程表达式,为进一步寻求抑制、消除颤振策略提供了理论依据。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1混凝土地下室墙裂缝渗漏的分析与处理方法
- 2初中效过滤器的清洗
- 3SMT测试分光分选机三维模型ProE设计
- 4竣工结算资料交接单
- 5蜗轮减速器总装图
- 6石镇大桥连续刚构悬臂施工的控制
- 7维修工程施工组织设计
- 8SN/T 1588.1-2005 灯具发热试验用热试验光源
- 9YY/T 1264-2015 适用于臭氧灭菌的医疗器械的材料评价
- 10excel编的测绘软件
- 11珠江新城某地块商住楼现场测量方案
- 12监理月报2010年12月
- 13条形座椅设计SU模型(版本50)
- 14给排水、采暖、燃气工程定额(2001)下册
- 15QJ 1163.12-1987 深度、高度、长度极限量规型式尺寸与技术条件 弯头槽宽塞规 (B=1.5-20)