16MnDR钢板埋弧焊对接接头性能研究
- 文件大小:286.85KB
- 浏览次数:
- 发布时间:2014-03-11
本资料包含pdf文件1个,下载需要1积分
Welding method of submerged arc welding was used to the plate butt welded joint of 16MnDR,and the microstructure of the welded joint was observed,mechanical properties test and micro-hardness test were also carried out.The results of experiments shows that the tensile strength of the welded joint were not less than that of 16MnDR steel,and no crack appeared in side bend test.In addition,the low temperature impact toughness of the welded joint is excellent.Peak hardness appeared in the heat affected zone.Microstructure of the welding seam was acicular ferrite,eutectoid ferrite and a small amount of granular bainite.Welded joint with excellent properties could be obtained if the welding parameters provided in the paper be implemented.对采用埋弧自动焊焊接的16MnDR钢板对接焊接接头进行了力学性能试验、显微硬度测试以及金相组织观察。结果表明,该焊接接头的抗拉强度不低于16MnDR钢板,接头侧弯无裂纹,接头的低温冲击韧性优异,硬度在热影响区出现峰值,焊缝金相组织为带有少量粒状贝氏体的针状铁素体和先共析铁素体。
- 1YS/T 3019-2013 氰化堆浸提金工艺安全生产技术规范
- 21018.铁路客运专线路基CFG桩施工工艺及质量控制(摘录自山西建筑07年15期第114-115页)
- 3土建工程造价常识
- 414外粘钢板加固钢管柱承载力试验研究
- 5多元醇储罐cad图纸
- 6电站调节阀运行方式分析及选型
- 7城市供热蒸汽管网用波纹管补偿器结构施工图纸
- 8GB/T 5677-2007 铸钢件射线照相检测
- 9网络计划编制视频教程(好东西)
- 10空压站工艺管道及仪表流程图
- 11约翰克兰机封样本PDF扫描版
- 12JB系列全套液压管接头CAD图纸完整版
- 13地沟及盖板知识资料库(2009合订本)
- 14电资料检验批
- 15GB/T 37303.5-2019 船舶和海上技术 船舶操纵性 第5部分:潜水艇特殊要求