TiB2基复合陶瓷材料的烧结性能研究
- 文件大小:565.87KB
- 浏览次数:
- 发布时间:2014-03-11
文件介绍:
本资料包含pdf文件1个,下载需要1积分
New-type TiB2 based composite ceramic material is produced with hot-pressing method. The influence of sintering temperature and sintering time to densification of the material is studied. It shows that in the sintering temperature range of 1470-1530℃, sintering temperature has big influence to densification of BT30 and BT30A10, while in 1530-1590℃, the influence to BA30 is more significant. With the time of keeping warm longer, the relative density of BT30, BA30 and BT30A10 is all increased greatly, but in case the sintering time exceeds 60min and 30min, the densification of BT30 and BA30 does not change much.用热压烧结法制备了新型TiB2基复合陶瓷材料,研究了烧结温度和烧结时间对TiB2基复合陶瓷材料致密化的影响。研究发现在1470-1530℃的烧结温度范围内,烧结温度对BT30和BT30A10的致密度影响较大,在1530―1590℃范围内,烧结温度对BA30的致密度影响显著。随保温时间的延长,BT30、BA30和BT30A10的相对密度均有大幅度提高.但是当烧结时间分别超过60min和30min后,BT30和BA30的致密度变化不大。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1挂篮结构计算书
- 2定额调整系数汇总
- 3跳步模总装图
- 4现行铁路工程建设标准规范目录(截至时间2011年12月31日)
- 5机械制造工艺学课程设计任务书 设计“CA6140车床拨叉”零件的机械加工工艺规程及工艺设备
- 62011年造价员考试模拟训练复习题(含答案)_secret
- 7高性能砼技术讲座
- 8Dip Pretreatment(浸槽前处理)
- 9完美坡面标高自动计算(挖方)
- 10GCr4与GCr15钢冲击韧性和接触疲劳寿命对比分析
- 11装修建材城装修预算表范本
- 12GB/T 25712-2010 振动时效工艺参数选择及效果评定方法
- 13某大桥(K0 505.320∽K1 029.028)中跨合龙施工方案
- 14GD200管带机总图
- 15选矿厂施工图