高速旋转平面反射镜镜面变形测量
- 文件大小:557.2KB
- 浏览次数:
- 发布时间:2014-03-13
文件介绍:
本资料包含pdf文件1个,下载需要1积分
A method of deformation measurement is introduced for a rotating plane reflective mirror with high speed. Since the inertia moment is added by mirror rotating, a bend deflection will appear on the body of plane reflective mirror, which will influence the quality of laser beam capture. With regards to this, strains are measured in the mirror body by strain gauges, and the signals are transferred for data acquisition through a slip ring. Based on the relationship between deformation and strain, the corresponding equivalent thickness of mirror body can be estimated by simulation, and the deformation of mirror body can be reconstructed by digital integration. Compared with the finite element calculation results, the correctness of the measurement is verified. Research experiment shows that the proposed method is successful in the result of measurement, and it gives new clue of the deformation estimation of rotating mirror.本文将介绍高速旋转平面反射镜镜面变形测量。平面反射镜在高速旋转时由于镜体倾斜引起的惯性力矩会使镜体产生弯曲变形,影响成像质量。利用应变电测法,通过导电滑环把镜体旋转时镜面应变片电阻变化信号连接到应变仪。从变形与应变之间的关系,用仿真方法估计镜体等效厚度,数值积分重构镜体弯曲变形。并与有限元计算结果进行对比,验证测量的正确性。研究表明:该方法有效可行,为旋转镜面变形测量提供一种新的思路。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1GB 10383-1989 饲料用黑大豆
- 2环保验收报告(格式)
- 3试验员考试小抄
- 4筑业2011通用+++
- 5TB/T 2075.13-2002 电气化铁道接触网零部件 第13部分:定位线夹
- 6CECS 287: 2011漩流降噪特殊单立管排水系统技术规程
- 7某厂房给排水施工图
- 8(全都有答案)2012材料员第二套网上练习模拟题
- 9TB/T 2674.1-1995 信号电缆盒
- 10中式石灯设计SU模型(版本19)
- 11母线
- 12灰土垫层检验批质量验收记录表Ⅱ
- 13现场机构图组织图
- 14JIS C8201-5-10-2001 低压开关设备和控制设备.第5-10部分:用于接触器和马达起动器的接触继电气和辅助触点
- 15工程竣工申请表