基于ANSYS软件模拟冲击接触问题的讨论
- 文件大小:605.42KB
- 浏览次数:
- 发布时间:2014-03-15
本资料包含pdf文件1个,下载需要1积分
The impact contact algorithm was studied and realized by means of ANSYS software. The study included three aspects: the selection of contact algorithm, the determination of contact stiffness, and the best balance between convergence and accuracy. A general method that dealt with these problems by ANSYS software was summed up. And this method was used in the impact analysis of a ship' s thrust bearing. Result of the example shows that this method is successful because of its good convergence and small amount of infiltration. The consistency between the calculation result and engineering experience indicates that this method is feasible and effective.在分析接触算法原理及优劣的基础上,研究如何在ANSYS软件平台上实现冲击一接触计算,主要包括接触算法选择、接触刚度的确定,如何实现收敛性和准确性之间的一个最佳平衡。通过上述过程,总结出ANSYS软件处理此类问题的一般方法,并通过某船推力轴承的冲击计算算例进行验证。算例表明采用此方法接触计算较成功,收敛性好,渗透量小,计算结果的整体趋势符合工程经验,说明方法的可行性及有效性。
- 1碧水商业宾馆中央空调设计施工图纸CAD
- 2TSG R0009-2009 车用气瓶安全技术监察规程
- 3样品处理系统各组成部分的功能及其设计概述
- 4公路桥梁隧道施工实务全书
- 5GB/T 17289-2009 液态烃体积测量 涡轮流量计计量系统
- 6某化粪池大样图
- 70#块托架技术交底
- 8JB/T 8386.1-1996 工业过程测量和控制系统用模拟输入数字式指示控制仪 第1部分 两位或多位输出仪表
- 9广州穗园小区物业管理投标书
- 10YD 5101-2003 800MHz CDMA数字蜂窝移动通信基站设备抗地震性能检测暂行规定
- 11GB/T 24965.4-2010 交通警示灯 第4部分:临时安全警示灯
- 12JIS G4109-2003 Chromium-molybdenum alloy steel plates for boilers and pressure vessels
- 13风机基础设计
- 14SL 483-2010 洪水风险图编制导则
- 152012公路工程试验检测人员考试隧道问答题汇总