冷连轧机垂直振动特性的有限元仿真分析
- 文件大小:590.53KB
- 浏览次数:
- 发布时间:2014-03-16
本资料包含pdf文件1个,下载需要1积分
The vibration influence on the quality of strip for 2180mm six-high tandem cold rolling mill is discussed. The abnormal frequency of mill is analyzed by spot examination. The methods of numerical computation and finite element method simulation by the ANSYS are adopted to set up dynamic model of six-high rolling mill. At the same time, the natural frequency of mill and the response to mill at different excitation is calculated. Comparing the analysis results with the data from the experiment, the finite el- ement models presented were proved to be an efficient and valid way to simulate actual working conditions.针对某厂2180mm六辊冷连轧机生产过程中因振动而引起的带钢表面振纹问题,从现场综合实测人手,分析了轧机异常振动时的振动信号,采用理论分析和有限元数值计算相结合的方法,建立了六辊冷连轧机机座系统三维有限元模型,对其固有特性进行仿真分析,探讨在外界激励下辊系的动态响应,计算得到轧机容易激发振动的主要频率。结果表明,仿真和实测数据吻合,能够准确地得出系统异常振动过程的各种响应状态,为进一步分析设备运行中存在的问题、提出抑振措施,提供了有力保证。
- 117中国土木工程师手册__第十七篇_桥梁工程
- 204G101-4
- 3Mn3(Cu0.6Si0.15Ge0.25)N/Ag复合材料的负热膨胀与物理性能
- 4施工卸料平台安全专项方案
- 5模板早拆支撑施工设计方案
- 6TSG Q6001-2009 起重机械安全管理人员和作业人员考核大纲标准
- 7统一用表集合1
- 8瑞景小区七层住宅楼电气设计施工图
- 9WW/T 0090-2018 世界文化遗产地风险管理 术语
- 10地源热泵培训资料之水水热泵系统原理
- 11框架梁的计算设置介绍(上)
- 12SATWE参数设置总结
- 13JB/T 10414-2004 液压二通插装阀试验方法
- 14清华斯维尔全过程造价咨询管理信息系统
- 15配变安装典型设计