基于有限元分析的机床床身结构优化设计
- 文件大小:550.61KB
- 浏览次数:
- 发布时间:2014-03-17
本资料包含pdf文件1个,下载需要1积分
With a certain type of NC machine tool bed as the research object, a few preliminary improvement schemes of the structure are put forward on the basis of the static and dynamic analysis. Analyzing the sensitivity of dynamic property of design parameters of the structure such as the thickness of wall boards and ribs by using the principle of dynamic sensitivity analysis. Thus, finding out design parameters affect greatly the dynamic property of the structure. Then, with static deformation, the first natural frequency and mass of the structure as optimized objects are taken, up with a superb scheme of the structure.以某型数控机床床身为研究对象,在对其结构进行静动态分析的基础上,提出了结构的初步改进方案。应用动态特性灵敏度分析原理对壁板、筋板的厚度等设计参数进行动态灵敏度分析,得出了各个设计参数对床身结构动态特性的影响程度。在此基础上以床身结构的静力变形、一阶固有频率和质量为优化目标,提出了该床身的最终结构设计方案。
- 1某大桥工程勘察设计投标商务文件-勘察设计工作大纲
- 2施工组织设计_027结构吊装技术措施
- 3944.软基处理粒料桩干法施工实践探讨(摘录自山西建筑07年13期第115-116页)
- 4JT/T 29.22-1993 交通行业工人技术等级标准 港口 港口广播员
- 5GB/T 36358-2018 半导体光电子器件功率发光二极管空白详细规范
- 6西南财经大学(财务管理)
- 72012届建工方向毕业设计参考资料
- 8FANUC-0iC主轴参数说明书
- 9监理企业资质等级及承建范围
- 10JGJ/T 208-2010 后锚固法检测混凝土抗压强度技术规程
- 11JB/T 10141.1-1999 车轮车床 精度检验
- 12柱销联轴器ZL8
- 13GB/T 1268-1998 化学试剂 硫氰酸钠
- 14实轴新摩擦焊首检台catia设计
- 15荣信研发办公楼铺装、景观小品工程技术标