添加剂对水基乳化液极压性能的影响
- 文件大小:1.23MB
- 浏览次数:
- 发布时间:2014-03-18
本资料包含pdf文件1个,下载需要1积分
采用MS-800A四球摩擦试验机,考察了7种新型添加剂在乳化液中的极压性能。并通过扫描电子显微镜(SEM)和能量色散谱(EDS)对摩擦表面进行微观分析。实验结果表明:氯化脂肪酸DA8527能在金属表面形成承载能力很强的保护膜,具有很好的极压性能;加入少量的酯类添加剂GY25和油酸异辛酯IPO时乳化液就能达到较高的P8值;多硫化物RC2540对提高乳化液极压性有一定的作用,硫化脂肪RC2526和氯化石蜡P51NR的极压效果一般,水溶性磷酸酯LP700极压性能较差。 The extreme pressure property of seven kinds of new additives in water-based emulsion was studied in MS-800A four ball testing machine. The worn surface was analyzed by Scanning Electron Microscopy (SEM) and Energy Dis-persive Spectrometer(EDS). The results show that fatty acid chlorides DA8527 has the best extreme pressure property, which can form the highest strength film on the mental surface;the ester additives GY25 and IPO can reach a high max non-seizure load at a lower concentration;Polysulfide RC2540 has certain effect on improving the extreme pressure of the emulsion ;the extreme pressure property of sulfuretted fat RC2526 and chlorinated paraffin PS1NR is not obviously and LP700 is poor.
- 1技术交底全套
- 22012测量员岗位实务知识练习题
- 3SN/T 3193.3-2014 进出口轻工行业成套设备检验技术要求 第3部分:纸或纸板加工机器
- 4GB/T 38179-2019 燃气轮机应用 用于发电设备的要求
- 5某建筑工程塔吊安装施工方案
- 6DB12/680-2016 反恐怖防范管理规范 第13部分:中小学幼儿园
- 7819.深基坑工程中地下室结构后拆支撑施工方法总结(摘录自建筑施工08年2期98-100页)
- 8PVC型材配方设计与加工工艺
- 9海底60m钻机绳索取心液压绞车技术参数
- 10TB/T 3189-2007 铁路信号计轴应用系统技术条件
- 11安装工程2001北京市建《建筑预算定额》说明及计算规则
- 12252m烧结机(成品筛分室配置图)
- 13地下室防水节点详图
- 14施工组织设计范本303
- 15武汉职业技术学院教工宿舍楼弱电设计施工图纸