机械手全套毕业设计
- 文件大小:1.42MB
- 浏览次数:
- 发布时间:2012-09-04
本资料包含doc文件1个、dwg文件9个,下载需要100积分
机械手全套毕业设计ABSTRACT
In the modern large-scale manufacturing industry, enterprises pay more attention on the automation degree of the production process in order to enhance the production efficiency, and guarantee the product quality. As an important part of the automation production line, industrial robots are gradually approved and adopted by enterprises. The technique level and the application degree of industrial robots reflect the national level of the industrial automation to some extent, currently, industrial robots mainly undertake the jops of welding, spraying, transporting and stowing etc. , which are usually done repeatedly and take high work strength, and most of these robots work in playback way.
In this paper I will design an industrial robot with four DOFs, which is used to carry material for a punch. First I will design the structure of the base, the big arm, the small arm and the end manipulator of the robot, then choose proper drive method and transmission method, building the mechanical structure of the robot. On this foundation, I will design the control system of the robot, including choosing DAQ card, servo control, feedback method and designing electric circuit of the terminal card and control software. Great attention will be paid on the reliability of the control software and the robot safety during running. The aims to realize finally include: servocontrol and brake of the joint, monitoring the movement of each joint in realtime, playback programming and modifying the program online, setting reference point and returning to reference point.
KEY WORDS: robot, playback, servocontrol, brake
目 录
第1章 绪论 3
1.1 机器人概述 4
1.2 机器人的历史、现状 4
1.3 机器人的发展趋势 4
第2章 机器人实验平台介绍及机械手的设计3
2.1自由度及关节 4
2.2 基座及连杆 4
2.2.1 基座 7
2.2.2 大臂 7
2.2.3 小臂 7
2.3 机械手的设计4
2.4 驱动方式4
2.5 传动方式4
2.6 制动器4
第3章 控制系统硬件4
3.1 控制系统模式的选择4
3.2 控制系统的搭建 4
3.2.1 工控机4
3.2.2 数据采集卡4
3.2.3 伺服放大器4
3.2.4 端子板 4
3.2.5电位器及其标定 4
3.2.6电源 4
第4章 控制系统软件 4
4.1预期的功能 4
4.2 实现方法4
4.2.1实时显示各个关节角及运动范围控制 4
4.2.2直流电机的伺服控制4
4.2.3电机的自锁4
4.2.4示教编程及在线修改程序4
4.2.5设置参考点及回参考点4
第5章 总结 4
5.1 所完成的工作 4
5.2 设计经验 4
5.3 误差分析 4
5.4 可以继续探索的方向 4
致 谢 4
参考文献 4
- 1陕西省工程量清单计价费率2009
- 2Mn3(Cu0.6Si0.15Ge0.25)N/Ag复合材料的负热膨胀与物理性能
- 3东莞碧水天源别墅施工图附效果图
- 4一个农村别墅设计图
- 505YJ3-3 外墙夹芯保温
- 6GB/T 13704-1992 船用广播系统通用技术条件
- 7珠江黄埔大桥S13合同段番禺11号公路跨线桥现浇箱梁施工设计方案(1)
- 8GB/T 50983-2014 低、中水平放射性废物处置场岩土工程勘察规范
- 9某清单招标文件实例
- 10一汽大众4S店施工组织设计方案
- 11市政绿化资料
- 12DG/T 146-2019 沼气发电机组
- 13电线电缆穿管和线槽敷设检验批-质量验收记录表
- 14圆柱折弯机
- 1502s404防水套管图集(GJBT-594)