基于ADAMS的牛头刨床摆动导杆机构速度平稳性优化设计
- 文件大小:1.04MB
- 浏览次数:
- 发布时间:2014-08-26
本资料包含pdf文件1个,下载需要1积分
采用了ADAMS参数化优化的设计方法,对牛头刨床切削运动导杆机构进行速度平稳性的优化,以运动点的坐标值作为设计变量代替杆长,将各个坐标值进行了参数化处理,建立了牛头刨床机构参数化模型,将各个设计变量对速度的敏感度进行了测试,得到并判断出关键设计变量,在优化计算中确定了各个关键设计变量的最优参数,最终得到了速度平稳性良好的牛头刨床尺寸参数。
In the velocity optimization process of the cutting movement in the shaping guide--rod mechanism, it has adopted the method of parameterize optimization which comes from the ADAMS, coordinate value of the moving points substitutes the rod length as the design variables, all the coordinates has been parameterized, the sensitivity to velocity of each design variables are tested, and then it has received and judged out which are the key design variables, the optimum parameters of each key design variables is determined in the optimization calculation, and the most suitable parameters of shaping mechanism which tile veh)city is steady and uniform has been found finally.
参数化优化,速度平稳性,牛头刨床,parameterize optimization,the stability of velocity,shaping mechanism。
基于ADAMS的牛头刨床摆动导杆机构速度平稳性优化设计。
- 1基础主体结构验收记录
- 2GB/T 11483-1989 交流等离子体显示器件测试方法
- 3土地治理项目监理招标投标文件技术标部分
- 4昆山茂祯电子材料有限公司二层办公综合楼建筑设计施工图
- 5DB50/T 793-2017 渝菜 紫阳鸡烹饪技术规范
- 619-自行车棚构造详图
- 7浙江省工程建设标准《建筑钢结构钢材及连接理化测试规程》(报批稿)
- 8双缸四柱液压机的液压系统设计和PLC控制(优秀机械毕业设计含CAD图纸+说明书论文)
- 9夹洪路注浆施工设计方案
- 10房屋装修工程施工合同协议条款
- 11GB/T 14139-2019 硅外延片
- 12钢结构防腐涂装工艺标准
- 13别墅图纸 2010
- 14自动绕线机,整套模型、含参数三维模型SolidWorks设计
- 15水利工程论文水利工程造价论文