有机玻璃扭动微动磨损的实时观测与摩擦振动分析
- 文件大小:2.15MB
- 浏览次数:
- 发布时间:2014-09-19
本资料包含pdf文件1个,下载需要1积分
在新研制的扭动微动磨损实时观测系统上,以法向载荷为100 N和扭动角位移幅值为0.5°~15.0°的参数,对有机玻璃(Polymethylmethacrylate,PMMA)/GCr15摩擦副进行扭动微动磨损试验,同时录制扭动微动过程并同步采集摩擦振动信号。在摩擦动力学行为分析的基础上,结合实时观测和摩擦振动分析,对PMMA的扭动微动磨损行为进行研究。结果表明,随着角位移幅值增加,PMMA扭动微动呈现三个区域(即部分滑移区、混合区和滑移区);在部分滑移状态(θ=0.5°)下,损伤轻微,振动数据与空载时振动数据相似,相对运动主要靠弹性变形协调;在完全滑移状态(θ=15°)下,整个接触区发生严重损伤,大量磨屑被排出接触区,接触区最外侧呈现纺锤状银纹,每循环次数下振动信号的事件发生数先增大后减小,而振动振幅呈现相反的趋势,主要损伤机制为弹塑性变形、剥层和氧化磨损。
The torsional wear tests of polymethylmethacrylate (PMMA)againstGCrl5 is carried out under the angular displacement amplitudes ranging from 0.5° to 15.0° and the normal load at 100 N on a new developed real time observation system of torsional fretting wear, meanwhile, the fretting process is recorded and at the same time the friction vibration is collected. Based on the analysis of the frictional kinetics of torsional fretting, the torsional fretting behavior of PMMA is analyzed by real time observation and friction vibration analysis. The results show that there are three fretting running regimes, i.e. partial slip regime, mixed fretting regime and gross slip regime; when the fretting is running in the state of partial slip (0=-0.5°), the damage is slight and the vibration statistic is similar to load-free condition because the relative motion is accommodated by elastic deformation. In the state of gross slip (0=15,0°), the contact zone is damaged intensely, and a great deal of the wear debris is removed from the contact zone, there are some crazes in shape of spindle at the edge of contact zone. Meanwhile, the events of friction vibration per cycle increases and then decreases with the increase of the number of cycles; on the other hand, the amplitude of friction vibration shows an opposite trend. The main damage mechanisms are elastic-plastic deformation, delarnination and oxidation wear.
扭动微动磨损,摩擦振动,实时观测,有机玻璃,Torsional fretting Friction vibration Real time observation Polymethylmethacrylate。
有机玻璃扭动微动磨损的实时观测与摩擦振动分析。
- 1事故车辆的维修
- 2JB/T 8650.1-1997 机床冷却系统元件 高扬程冷却泵
- 3通州会所建筑设计施工图纸
- 4公路路基知识
- 5多层商住楼计算书
- 6磨杆装配
- 7苏JT24-2004蒸压轻质加气混凝土(NALC)砌块建筑构造图集
- 82012年版安全工程师考试教材:安全生产事故案例分析
- 9GB 50128-2014 立式圆筒型钢制焊接储罐施工规范
- 102010年12月份水暖建材商品价格表(共1万3千条,是做投标的最好助手)
- 11无极绳绞车SQ-80-110地基图
- 12一级建造师建设工程项目管理模拟试题
- 13阳台带悬挑梁时板如何布置才能正确算出阳台面积
- 14闭合导线坐标自动计算表 (1)
- 15木制老爷车iges/igs格式