干涉配合螺栓的减摩安装研究
- 文件大小:1.02MB
- 浏览次数:
- 发布时间:2014-08-13
文件介绍:
本资料包含pdf文件1个,下载需要1积分
针对某型飞机研制中干涉配合螺栓在夹层结构中的安装问题,对安装过程中的摩擦进行了分析,提出了采用固体膜润滑剂进行减摩的安装方法。采用减摩安装方法,对直径6~27mm之间的7种螺栓进行了安装,分析了安装效果。结果表明,减摩安装方法可降低干涉螺栓安装难度,提升安装质量。
Aiming at the problems that inter- ference-bolt installed in sandwich struction of a certain aircraft, the friction of fitting is analyzed, and a installa- tion method with solid film lubrication for antifriction is proposed. Antifriction installation method is used to install seven types interference-bolt that diameter from 6ram to 27mm, the installation quality is also analyzed. The results show that the antifriction installation method can reduce the difficulty and advance the installation quality of inter-ference-bolt.
螺栓,干涉配合,减摩,Bolt Interference fit Antifriction。
干涉配合螺栓的减摩安装研究。
文件列表
正在加载...请等待或刷新页面...
发表评论
更多..相关推荐
更多..最近更新
- 1施工图问题(建筑)
- 2GB/T 17595-1998 纺织品 织物燃烧试验前的家庭洗涤程序
- 3NY/T 1155.3-2006 农药室内生物测定试验准则 除草剂 第3部分 活性测定试验 土壤喷雾法
- 4GB/T 24691-2009 果蔬清洗剂
- 5万科工程管理手册行政导则
- 6周长红新设计金湾花园R14-1#平面施工图-666
- 7FZ/T 13012-2014 普梳涤与棉混纺本色布
- 8JB9080.1焊接铝弯管
- 9某市政工程道路排水竣工CAD图纸
- 10标准直齿跨测齿数与公法线长度
- 11各种建筑机械操作规程
- 122012监理工程师三控全真模拟(参考价值极高)
- 13桩承台分项工程质量技术交底卡
- 14某县综合档案馆建设项目装饰装修工程施工组织设计
- 15JB/T 7293-1994 内燃机主轴承盖螺栓与螺母 技术条件