基于BIOY―C22型环模制粒机的辊模间隙调节结构设计
- 文件大小:1.36MB
- 浏览次数:
- 发布时间:2014-09-15
本资料包含pdf文件1个,下载需要1积分
BIOY―C22型环模式制粒机利用环模与压辊之间的挤压力将物料碾压成颗粒,环模与压辊之间的间隙对成型有很大影响,一般要求其间隙在0.1-0.3mm。通过对间隙调节零件进行设计,研制环模式制粒机的间隙调节结构,为优化间隙调节机构提供理论参考。
BIOY-C22 ring die pelletizer is used to grind material into particles through extrusion pressure between the ring die and the roller rolling. The clearance between roller and ring die has a great influence on molding. Generally, clearance gap was in 0.1-0.3 mm. Roller die clearance adjustment structure could adjust the space between the ring die and the roller flexibility, then make up for clearance changes brought about by wear or error. And it makes sure that clearance was in the better scope. Based on the laboratory existing pelletizer ring mode, and from the angle of the parametric design, this paper designed an appropriate form of clearance adjustment structure.
辊模间隙,环模制粒机,设计,调节零件,微调,角度,ring die pelletizer,pressure roller,design,clearance adjustment,fine adjustment,angle。
基于BIOY―C22型环模制粒机的辊模间隙调节结构设计。
- 1车床尾座套筒加工工艺规程及夹具设计设计说明书
- 2建筑施工模板计算机辅助设计系统
- 3椒江二桥工程量清单
- 4化学工人自学丛书 化工单元操作 干燥
- 5城市快速路设计规范
- 6YB/T 109.8-2012 硅钡合金磷含量的测定铋磷钼蓝分光光度法
- 7冲久水库土建及闸门、启闭机安装工程施工组织设计-冲久水库技术部分(CJCⅠ)
- 8长清路站矩形顶管施工组织设计
- 9JIS D 1701-1995 冷藏或冷冻汽车的车箱保冷性能的试验方法
- 10茂名湛江铁路1标技术文件
- 11一级建造师04-10历年真题
- 12住宅楼工程梁柱节点钢筋隐蔽旁站方案 (11)
- 13亚热带湿润季风区水库除险加固施工组织设计
- 14换热站施工组织设计1
- 15环氧乙烷生产流程图