封隔器的虚拟样机设计与仿真分析
- 文件大小:1.07MB
- 浏览次数:
- 发布时间:2014-12-28
本资料包含pdf文件1个,下载需要1积分
以Y211-115型封隔器为例,利用CAD/CAE技术,通过三维动态模型对封隔器进行结构设计、机构仿真,并对其密封关键部件――胶筒组合进行了有限元分析。详细给出了虚拟环境下封隔器及其关键部件设计和研究的基本过程。实现了封隔器的参数化设计,虚拟样机和关键部件力学性能的仿真分析,对封隔器,尤其是压缩式封隔器的设计与仿真分析具有指导意义。
In this paper,taking the packer Y211-115 type as an example, using the CAD/CAE techniques, the virtual proto- typing analysis and mechanical properties of the key components has been realized. The basic process of the design and re- search of the packer in the virtual environment has been given. The parametric design of the packer, virtual prototyping and simulation of the mechanical properties of the key components are all achieved. This process plays an important role in the de- signing and simulation of the packers.
封隔器,虚拟设计,机构仿真,接触应力,有限元分析,packer,virtual design,mechanism simulation,contact stress,finite element analysis。
封隔器的虚拟样机设计与仿真分析。
- 1小波变换应用于谐波谱线的噪声滤除与基线校正
- 2SH/T 3022-2011 石油化工设备和管道涂料防腐蚀设计规范
- 3工程开工申请表
- 4交通银行上海支行装修设计施工图
- 5某私人别墅建筑施工图带效果图99
- 6门窗分格艺术造型原理
- 7建筑安装分项工程施工工艺(三)
- 8平法钢筋实操首选之作_61-G101平法钢筋识图与算量
- 9岩土工程原位测试概述1
- 10JB/T 3063-2011 烧结金属摩擦材料 技术条件
- 116米喷房总装图
- 12DB34/T 846-2008 富硒稻种植技术规范
- 13GB/T 8890-1998 热交换器用铜合金无缝管
- 14JB/T 20060-2005 转鼓贴标签机
- 15折叠板房SolidWorks设计