基于有限元的关节轴承研究
- 文件大小:1.03MB
- 浏览次数:
- 发布时间:2014-03-07
本资料包含pdf文件1个,下载需要1积分
Contact characteristics of spherical bearing has important influence on its motion performance, in order to study the contact characteristics, finite element model of spherical bearing was established by ANSYS. Pressure distribution of spherical bearing under the load cases of axial load, radial load and complex load was analyzed respectively. The influence of the lubricating groove on the contact stress of spherical bearing was also studied. The results show that pressure distribution and area of press concentration of spherical bearing are different under axial load, radial load and complex load, while under all loads it has maximum stress at the edge of bearing outer ring spherical surface. The maximum stress of bearing outer ring is larger than bearing inner ring. Rational lubricating groove can reduce the contact stress effectively.关节轴承的接触特性对其运行性能具有重要影响,为了研究关节轴承的接触特性,利用有限元软件ANSYS建立了关节轴承有限元模型。分析了轴向载荷、径向载荷和轴径复合载荷下关节轴承的应力分布,并研究了导油槽对接触应力的影响。结果表明:轴向载荷、径向载荷和轴径复合载荷下的应力分布和应力集中部位不同,但各种载荷下关节轴承外圈球面边缘处都产生应力集中;轴承外圈的最大应力比轴承内圈最大应力大;合理的导油槽能够起到减小应力集中的作用。
- 1SH3003-2000T 石油化工合理利用能源设计导则
- 2广场景观绿化平面设计cad图纸(版本4)
- 308FJ06防空地下室施工图设计深度要求及
- 4新建铁路厦深线漳州南站房及配套工程锤击PHC管桩施工工艺流程过程图片
- 5置安装工程 接地装置施工及验收规范
- 6神机妙算煤炭套价软件操作视频
- 7基于随机场理论的桩基沉降预测方法
- 8晾衣竿,SolidWorks设计
- 9常用紧固件产品手册
- 10SJ/T 10201-1991 谷物水分电子测量仪通用技术条件
- 11某城市规划su模型(版本25)
- 12二级建造师《工程法规》精讲班mp3课件第27讲 第一章建设工程法律制度(新版)
- 13重大危险源清单1
- 14常用风机控制电路图99D303-2_001-2011
- 15QJ 2183.4-1991 胶接式冷冲模架零件 四导柱(FB FR)型下模板