铜粉对半金属摩擦材料摩擦学性能的影响
- 文件大小:585.11KB
- 浏览次数:
- 发布时间:2014-03-07
本资料包含pdf文件1个,下载需要1积分
Semimetal friction material containing different content of copper powder was prepared by using directly mixed method.Effects of copper prwder content on tribological behavior were studied by using friction tester, morphologies of wear surface were observed, and wear mechanism was analyzed.The results show that by adding copper powder, friction coefficient at medium and high temperature is rising, heat fading and stability of material are improved, wear rate at medium temperature is reduced.When the content of copper powder is 3%, the tribological behavior of semimetal friction material is best.采用直接混合干法生产工艺制备出不同铜粉含量的半金属摩擦材料,用定速式摩擦试验机进行摩擦磨损试验,分析了铜粉含量对半金属摩擦材料摩擦学性能的影响,并通过观察磨损形貌照片分析其磨损机制。结果表明,铜粉能够提高半金属摩擦材料制品在中温以及高温的摩擦系数,能够显著改善材料的抗热衰退性和稳定性,能够降低半金属摩擦材料中温阶段的磨损率。当铜粉质量分数为3%时,半金属摩擦材料的摩擦挚陛能最佳。
- 1型材30系列-30_120-10槽CAD图档
- 2建筑工程施工组织设计管理规程DB11/T 363-2006
- 3YS/T 897-2013 高纯铌化学分析方法痕量杂质元素的测定辉光放电质谱法
- 4深圳红岭大厦工程施工组织设计
- 5床SolidWorks设计
- 6NB/T 42075-2016 无人值班小型水电站监控技术规范
- 7复件 塔式起重机安装专项施工方案
- 8路基及基层(市政技术交底)
- 9灵宝黄金股份公司研发中心室外工程施工组织设计
- 10大连市住宅集中管道井构造图集
- 11JB/T 7070.3-2002 调压器试验导则 第3部分:磁性调压器试验导则
- 12DG/T 005-2019 旋耕机
- 13螺丝刀SolidWorks设计
- 14jtg e60-2008 公路路基路面现场测试规程
- 15CRTSⅠ型板式无砟轨道施工PPT