各向同性热解石墨的纳米压痕试验与有限元仿真研究
- 文件大小:297.02KB
- 浏览次数:
- 发布时间:2014-03-11
本资料包含pdf文件1个,下载需要1积分
The load-displacement curves ofisatropic pyrolytic graphite were obtained through nanoin- dentation experiment.According to the theory of olive and pharr the hardness and the young modulus were calculated to obtain performance of main materials.Then a numerical model for the nanoindentation experiment was set up by finite element method.Through comparing the load-displacement curve fitted by finite element with the actual curve obtained from nanoindentation experiment,relative correlation was achieved.Finally plastic property of isotrapic pyrolytic graphite was got,which prove the feasibility of finite element simulation at the same time.通过对各向同性热解石墨进行了纳米压痕试验,得到了其材料的载荷―位移曲线。并根据Olive和Pharr理论算出了其硬度与弹性模量值,得到了主要的材料性能。在纳米压痕试验的基础上,通过有限元单元法建立了纳米压痕试验的数值模型,通过比较有限元所拟合的载荷一位移曲线和实际纳米压痕试验所得到的曲线,进行相应的修正,最后得到了该材料的塑性性能,也证明了有限元仿真的可行性。
- 1一污水处理厂设计全套(图纸\计算书\说明书),
- 2拆码盘机SolidWorks模型设计
- 3SN/T 0987.7-2001 出口危险货物中型散装货物包装容器 性能检验规则 纤维板中型散货箱
- 4灰色神经元拟合算法在有限元模型修正中的应用
- 5居甫渡公路二标道路建设施工技术文件(公路经典)
- 6梁志天大连咖啡厅施工图建筑图纸
- 7HG/T 3199-2009 石墨丝埋头
- 8gbt 19183.2-2003 电子设备机械结构 户外机壳 第2部分:箱体和机柜的协调尺寸
- 9YB/T 5206-2004 轻烧氧化镁
- 10GB/T 4199-2003滚动轴承 公差 定义
- 11美标硬密封硬球阀1Q61Y1500Lb全套CAD图纸
- 12电子产品外发加工合同书
- 13φ1500X5000填料洗涤塔
- 14内蒙某煤仓超高脚手架施工方案(满堂)
- 15蜗轮参数化3D