高速摆动下PTFE编织复合材料干摩擦研究
- 文件大小:262.68KB
- 浏览次数:
- 发布时间:2014-03-23
本资料包含pdf文件1个,下载需要1积分
利用高速摩擦试验机对PTFE编织复合材料进行干摩擦试验,研究不同条件(载荷、速度和湿度)下PTFE编织复合材料干摩擦磨损性能;并利用扫描电子显微镜对不同条件下的磨屑形貌进行分析。结果表明:单因素变化条件下,摩擦因数随载荷和相对湿度的增大而减小,随摩擦速度的增大而增大;磨损量随载荷和速度的增大而增大,但相对湿度的增加可降低磨损;载荷及速度的增加显著影响材料磨损状况。 The dry friction tests of PTFE braided composites were carried out on high-speed tribo-tester, and the effects of external factors (load, speed, humidity)on the friction and wear properties of PTFE braided composites were studied. The morphology of abrasive dust under different test conditions was characterized by scanning electron microscopy. The results show that by changing single factor, the friction Coefficient decreases with the increasing of load or relative humidity, while showing a increase with speed increasing. Wear mass loss increases with the increase of load or speed, and the rise of relative humidity reduces the wear loss. The increasing of load and speed influences the wear conditions seriously.
- 1范蠡路图纸会审纪要
- 2低压开关柜质量检查
- 3某综合楼工程酒店(3-12)层精装修工程施工组织设计
- 4交通部监理工程师考试-公路工程经济
- 5DB2103/T 006-2006 日光温室冬春茬茄子生产技术规程
- 6液压折臂吊CAD图纸
- 7某纸业有限公司仓库钢结构设计cad图纸
- 8GB/T 15050-1994 手工打结羊毛地毯
- 9几个卫生间立面设计图
- 10机耕道天桥(旧桥)拆除施工技术方案
- 11管道及仪表流程图
- 12重点储存设施自动控制技术改造概算
- 13YB/T 4340-2013 连铸钢方坯低倍枝晶组织缺陷评级图
- 14电工学(第七版)上册学习辅导与习题解答PDF扫描版
- 15制动盘模型ug/nx设计