润滑气体、弹性箔片特性对动压气体轴承静特性影响分析
- 文件大小:1.7MB
- 浏览次数:
- 发布时间:2014-08-13
为研究润滑气体物性和波箔材料特性对气体动压轴承的影响规律,以Hydresil型波箔径向轴承为对象,在综合考虑气体可压缩性和箔片变形等因素的基础上,运用有限差分法及Newton.Raphson迭代法耦合求解Reynolds方程和气膜厚度方程。分析了不同润滑介质物性参数和不同弹性箔片材料参数下的轴承气膜厚度分布、压力分布以及承载能力。结果表明:粘度从4.21×10^-6Pa?S升高到4.6×10^-5Pa?S,轴承承栽能力提高50%~75%,气膜分布与压力分布也更加均匀;在弹性模量70GPa~340GPa、泊松比0.15~0.45范围内,随二者增大轴承的承载能力分别提高5%~10%、30%~40%。
The influence of lubrication gas property and bump foil material properties on the static characteristics of bump foil journal bearings is analyzed in this paper. Accounting for air compressibility and foil deformation, film thickness analytical model is developed. Newton-Raphson method and finite difference method are applied to solve coupled Reynolds equation and air film thickness equation. Furthermore, the influences of lubri- cational gas property and bump the film thickness, pressure and foil material properties on load carrying capacity are compared and analyzed. In the elastic modulus of 70GPa to 340GPa and the parameters of the poisson's ratio of 0.15 to 0.45 range, the increase of elastic modulus and poisson's ratio helps to improve the bearing capacity of the bearing.
Hydresil型波箔轴承,箔片变形,物性参数,材料参数,HydresU bump foil bearing Foil defor-mation Physical property parameter Material prop-erty parameter。
润滑气体、弹性箔片特性对动压气体轴承静特性影响分析。
- 1钻10.5孔夹具装配图纸
- 2徐州第一中学男生宿舍建筑施工图
- 3别墅景观设计方案
- 4《水利工程勘察新技术、新规范与勘察评价实务全书》
- 5GB/T 14455.6-2008 香料 酯值或含酯量的测定
- 6DB51/T 1404-2011 地理标志产品 中国白酒金三角(川酒) 浓香型白酒
- 7古典牌楼施工图
- 8GB/T 18488.2-2015 电动汽车用驱动电机系统 第2部分:试验方法
- 9莘闵轻轨交通五标段施组
- 10机械图纸折叠方法国家标准
- 11现代金属铁艺灯泡吊灯SketchUp草图模型
- 121(爆破开挖监理实施细则)
- 13刀三维模型SolidWorks设计Sldprt格式
- 14JB/T 8432.2-2018 现场混装炸药车 第2部分:粒状铵油炸药型
- 15cjt 3043-1995 重力式污泥浓缩池周边传动刮泥机