基于DEFORM的数控钻削仿真研究
- 文件大小:737.87KB
- 浏览次数:
- 发布时间:2014-08-28
本资料包含pdf文件1个,下载需要1积分
基于DEFORM建立了钻削加工仿真模型,通过对单元类型的选择、网格划分与重划分等优化了模型。设定合理的边界条件,针对不同主轴转速、不同进给步数对切削力和切削热进行了仿真,仿真结果表明所构建的模型正确,仿真参数设置合理,为进一步提高刀具性能以及优化切削参数优化奠定了基础。
The simulation model of drilling machining is built based on Deform. The model is optimized by selecting element style, dividing the network and redividing. Reasonable boundary conditions is set, the cutting force and cutting heat are simulated in view of different spindle speeds and different feed step number. The simulation shows that the proposed model is correct and the simulation parameters is reasonable. This will lay the foundation for further improvement of tool performance and the optimization of cutting parameters.
单元节点,钻削,仿真,DEFORM,element node,drilling,simulation,DEFORM。
基于DEFORM的数控钻削仿真研究。
- 1热电厂及垃圾焚烧处理工程施工现场临时用电施工方案
- 2二级圆柱齿轮减速器SolidWorks设计
- 3GB/T 19787-2005 包装材料 聚烯烃热收缩薄膜
- 4石材地面铺设施工PPT课件
- 5SN/T 3717-2013 葡萄花翅小卷蛾检疫鉴定方法
- 6CCGF 305.1-2008 热轧带肋钢筋
- 71967拉力车轮毂SolidWorks设计
- 8原料液罐CAD图纸
- 9xxxxx项目开工奠基仪式策划案
- 10改性塑胶厂水电安装施工组织设计
- 11FZ/T 93013-2012 精梳毛纺环锭细纱机
- 12住区规划-现代新古典现代立面SU模型
- 13福建省某高速公路特大桥实施性施工设计方案
- 14GB 15358-1994 食品添加剂 DL-酒石酸
- 15HG/T 5474-2018 C.I.反应黄175