带式输送机之平行轴输出驱动装置架的优化设计
- 文件大小:169.41KB
- 浏览次数:
- 发布时间:2014-08-08
本资料包含pdf文件1个,下载需要1积分
带式输送机的驱动装置中驱动装置架的设计,对整个驱动装置的正常使用起着至关重要的作用。尤其是对于平行轴式的驱动装置架,由于电机、减速器的中心轴是垂直布置的,所以对于这种驱动装置架的设计存在一定的严奢陛,既要保证省料,又要保证强度。而我们经常使用的妨TII(A)型带式输送机设计手册》中驱动装置架的设计存在一定的缺陷,驱动装置架分裂开的情况时有发生,为避免类似现象的发生,我们对其设计作了部分优化,以达到驱动装置架不再分裂开的目的,也为以后类似驱动装置架的设计提供了参考依据。
The driving devices of belt conveyor drive frame design, for the entire drive device plays an important role in normal use. Especially for parallel shaft drive frame, due to the center of the motor, speed reducer shaft is vertical layout, so the design of the driving gear rack is for some rigor, both to ensure the material, and to ensure the strength. And we often use the DTII (A) type belt conveyor design manual drive in rack design has certain defects, driving device of the split situation occurs frequently, to avoid the happening of the similar phenomenon, we do part optimization of its design, to achieve the purpose of driving gear rack no longer split open, also for the future desizn of similar drive frame provides a reference basis.
带式输送机,平行轴输出,驱动装置架,优化,belt conveyor,parallel axis output,driving device,optimization。
带式输送机之平行轴输出驱动装置架的优化设计。
- 1昊昊号3号SolidWorks设计
- 2超高大跨度结构混凝土支撑系统设计与施工(摘录自《建筑技术》07年8期第577-579页)
- 3JIS K5902-2006 松香标准(修改件1)
- 4沈阳某酒店卡箍连接排水铸铁管专项施工方案
- 5降低工程成本节约措施
- 6装配体习作Delta机器人三维图
- 7高架结构_2009出版
- 802 建筑结构荷载规范(GB 50009-2001)(2006年版)(含条文说明)
- 9GB 26687-2011 食品安全国家标准 复配食品添加剂通则
- 10GB/T 25702-2010 复摆颚式破碎机 颚板磨耗
- 11LS/T 3243-2015 DHA藻油
- 12风管计算表
- 13混凝土结构设计 常用数据整理
- 14某景观亭设计CAD施工图(版本5)
- 15YB/T 5048-2006 拖拉机大梁用槽钢