六面顶液压机铰链梁强度计算
- 文件大小:759.17KB
- 浏览次数:
- 发布时间:2014-03-12
本资料包含pdf文件1个,下载需要1积分
Finite element mesh model of hinge sleeve of cubic press is established in analysis.The load transfer of the working cylinder is uniformly loading to the top and the bottom table of hinge sleeve of cubic press under ideal condition,without side force caused by working cylinder deformation.The stress of hinge sleeve of cubic press is calculated.The result shows that the maximum stress appears in the lug hole of hinge sleeve of cubic press,amounting to 243 MPa at most.The axial maximum relative displacement occurs at the bottom.After a long-term work,it will slightly convex along the y axis of hinge sleeve of cubic press,real cause for the fracture of the lug and at the bottom of hinge sleeve of cubic press.用ANSYS建立了铰链梁的有限元网格模型,在理想情况下,即工作缸传递的载荷均匀加载于铰链梁的上台面和下台面,且不考虑实际工作缸变形对铰链梁的侧向力,对六面顶液压机铰链梁的受力进行分析计算。模型计算表明:铰链梁的最大应力出现在凸耳通孔处,最大应力值为243MPa;铰链梁轴向最大相对位移出现在铰链梁的底部,长期工作后,铰链梁底部会沿y轴反方向发生微凸,是铰链梁凸耳和底部可能断裂的原因。
- 1SH/T 1822-2019 1,2,4,5-四甲基苯
- 22012江苏质检员考试题-专业实务部分
- 3监理表式07版
- 4栅栏焊接夹具三维模型SolidWorks模型设计
- 5SJ/T 9572.2-1995 彩色电视广播接收机用色度延迟线质量等分标准
- 6领从蹄鼓式制动器设计
- 7SMA路面平整度的防治措施
- 8几套别墅户型设计cad图纸
- 9601.桩基常见质量事故的处理探讨及应用(摘录自广东建材07年7期第76-78页)
- 10GB/T 18941-2003 高聚物多孔弹性材料 定负荷冲击疲劳的测定
- 11南通市某区域供水工程施工组织设计
- 12建设工程施工安全竣工评价会议纪要
- 13打印复印扫描一体机三维模型Inventor设计
- 14批量精装工程质量管理
- 15EDSA 方案设计文本