微造型对平行表面应力影响的流固耦合分析
- 文件大小:1.24MB
- 浏览次数:
- 发布时间:2014-03-18
本资料包含pdf文件1个,下载需要1积分
基于CFD的流固耦合技术,研究了微造型对平行表面应力分布规律的影响。分别建立了具有单个及多球冠状微造型的平行表面流固耦合有限元模型,着重分析微造型表面上应力变化。计算结果表明:微造型表面的最大应力会随微造型长度增加而增大;微造型深度的增加会造成微造型表面应力的波动;微造型布置方向、距离及其相互间干涉均能显著改变微造型表面的应力幅值和分布。 The effect of dimples on the slress of parallel surfaces is studied by the fluid-structure interaction technology of CFD. Finite element models for single and multiple spherical cap dimples are separately established. The variation of stress on the dimpled surface is analyzed. Numerical results show that the maximum stress of the dimpled surface increases significantly with increasing dimple length. The increase in dimple depth results in an obvious stress fluctuation. The peak value and distribution of the stress depend largely on the dimple layout direction, the distance and interaction between dimples.
- 1坡屋面砖混结构图纸
- 2钱胡路导线点、水准点一览表
- 3精细化学品配方大全(上册)(张英 主编)
- 4JASO T904-1998 中文版 摩托车——四冲程汽油发动机燃油——离合器摩擦特性试验
- 5小别墅全套建筑图(CAD图纸)
- 6电梯安装
- 7减速器回转机构
- 8暖通0402-去掉辅助电加热器_t3
- 9变频器控制一用一备水泵的策略分析及应用
- 10GB/T 29769-2013 废弃电子电气产品回收利用 术语
- 11MH/T 4018.6-2009 民用航空空中交通管理 管理信息系统技术规范 第6部分:人事数据交换
- 12全现浇剪力墙结构混凝土浇筑工程施工方法
- 13SN/T 2150-2008 进出口食品中涕灭砜威、唑菌胺酯、腈嘧菌脂等65种农药残留量检测方法 液相色谱-质谱/质谱法
- 14拼接玩具SolidWorks设计
- 15DBJ10-4-98基桩低应变动力检测技术规程