催化裂化装置再生器旋风分离器故障原因及措施
- 文件大小:718.38KB
- 浏览次数:
- 发布时间:2017-02-24
本资料包含pdf文件1个,下载需要1积分
某炼厂催化裂化装置催化剂损耗严重,检查发现了再生器旋风分离器料腿多处穿孔等故障,文章针对上述情况进行了原因分析,认为主要是料腿材质性能发生变化、拉筋的安装位置不合理等原因引起故障,“并提出了合理选材、在料腿与拉筋焊接处增殴护套等一系列改进措施,保证了装置高效、长周期稳定运行。
In the FCC unit of a refinery the catalyst lost seriously, disassembled the equipments and inspected, it was found that it had several perforations on the wall of dipleg. To solve the above problems, this article proposes failure analysis, considers the main reason is that dipleg material performance changes and installation position of the bracing is not reasonable, then put forwards a series of improvement measures, such as reasonable material selection, additional protective sleeve set in the welding place between dipleg and lacing wire. achieves the purpose of high efficiency and lone-term stable operation.
旋风分离器,故障,原因,措施,cyclone separator,failure,cause,measures。
催化裂化装置再生器旋风分离器故障原因及措施。
- 1TB 10010-2008 铁路给水排水设计规范
- 2气动吊机
- 3GB50174-2008《电子信息系统机房设计规范》
- 4主减速器驱动桥设计
- 5项目工长质量岗位责任制
- 6JB/T 5849-1991 阻抗继电器及装置
- 7GB/T 15305.4-1994 涂附磨具砂盘尺寸和公差
- 8一级建造师建筑实务高频考点
- 9Q$MBJ05.020-2006电饭锅结构设计规范
- 10DB34/T 329-2003 茶油桐尺蠖测报调查和防治技术
- 11欧式别墅室内施工图(附带赠送:莲湖别墅规划CAD)
- 12GB 8232-1987 粟(谷子)
- 13总复习(冲刺)阶段的学习策略及学法指导
- 1403X301-1 广播与扩声.rar
- 15钢结构材料查询